![]() Next, a first start wizard will pop up, which let’s you choose between some options.īe aware to choose a scale factor of 2.0 when asked. You’ll be greeted by the graphical U-Boot multiboot selection. tar xzvpf -numeric-owner -C /media/rootfsĬp bootargs.scr /media/rootfs/boot/ First bootĪfter you cleanly unmounted the partitions and put the microSD card back into the GTA04 you can boot your device, having the AUX button pressed (to access the boot menu). Then you have to copy the bootargs.scr file to /boot (on the microSD card). To install the SHR image, you have to untar the image you downloaded to the “rootfs”-partition. Your microSD card can have several partitions, e.g.: ![]() Then boot this special hw-validation microSD card having the AUX button pressed, to flash the new boot system (the screen will trun red while falshing).Īfter switching back (or reformating) to your normal microSD card you can always access the boot menu by booting the device, having AUX pressed. Otherwise you’ll have to get the latest hw-validation image from and put it on a specially formated microSD card (using the makesd script). If your device is shipped after November 2012 you’ll probably already have this system pre-installed. The new U-Boot system (as of November 2012) provides a graphical multi-boot solution. (latest staging image, for testers only).2012: Updated the instructions to the new default U-Boot enviroment. This is a step-by-step guide, which should get you from zero to a working SHR on your GTA04 in just a few minutes. ![]()
0 Comments
Leave a Reply. |